2022-4-17 版本 1.0.392.4
添加：
MsgBox_CutOffSheet#切断需确保激光头在板材上方。是否执行切断动作？#Ensure the laser head is above the plate before cut off operation. continue to execute?
mf13_5#切断参数#Cut-off Paramter
mf459#系统#SC System
mf520#板材尺寸过大#Sheet size is over flow
mf521#零件不符合内外膜规则#The part violates topology rules (Inner-Outter)
mf522#添加零件时参数错误#Parameter error while adding part
mf523#零件种类超过50#More than 50 parts
mf524#DLL内核错误#Nest-DLL kernel error
pd2408_1#无限卷料.切断板材-X右侧坐标#Unlimit Roll Sheet.Cut-off Sheet [X-Coord of Right point]

pd598#图形工艺控制.批量去膜轮廓数#Graph Process Control.The number of contour for Removal of film


修改：
mf13-1 mf13_1#旋转平台#Rotate Platform
mf13-2 mf13_2#交换平台#Platform Change
mf13-3 mf13_3#卷料控制#Roll Sheet
mf13-4 mf13_4#开始切断#Start Cut-off Sheet
mf17-1 mf17_1#龙门校正回原#Dual Servo Adjust

mp134#系统将进行喷嘴清洁，是否继续？#System will go to clean header, continue?
pd2408#无限卷料.切断板材-X左侧坐标#Unlimit Roll Sheet.Cut-off Sheet [X-Coord of Left point]

删除：
mf410#排样#Nest


2022-12-6：
增加：
mf252#加工报告[最新]#Work Report [New]
mf253#加工报告[全部]#Work Report [All]
mp303#空数据#Empty Data
pd2421#第4轴.回原点采样信号（重启有效）#The 4th Axis.Go Origin Sample Signal Type
pd2422#第4轴.行程开关逻辑#The 4th Axis.Limit Switch Type
pd2423#第4轴.粗定位速度#The 4th Axis.Go Origin Fast Speed
pd2424#第4轴.精定位速度#The 4th Axis.Go Origin Slow Speed
pd2425#第4轴.回原点方向#The 4th Axis.Go Origin Direction
pd2426#第4轴.回原点返回距离#The 4th Axis.Go Origin Offset
pd2427#第4轴.加速度#The 4th Axis.Accelerate
pd2428#第4轴.加速时间#The 4th Axis.Accelerate time
pd2429#第4轴.工作速度#The 4th Axis.Work Speed
pd2430#第4轴.空跳速度#The 4th Axis.Idle Speed
pd640_EC#扩展轴控制#Extend Axis Control
pd640_4th#第四轴控制#4th Axis Control
hp100#第四轴已被配置为电动调焦头，请重新设置#The 4th Axis has been set for auto focus, please check
hp101#第四轴已被配置为交换平台，请重新设置#The 4th Axis has been set for exchange platform, please check
hp102#第四轴已被配置为自动卷料，请重新设置#The 4th Axis has been set for auto roll sheet, please check
hp103#第四轴已被配置为旋转平台，请重新设置#The 4th Axis has been set for rotate platform, please check

删除：
pd232#第4轴.最大加速度#W Axis.Max Acc
pd231#第4轴.最大速度#4th Axis.Max Speed
pd980#第四轴#4th Axis
hp100#被重复配置#was repeatedly configured

